1076 Dundas Street West, Mississauga
647-696-6555
subwoofers
Strong, well-defined bass is what brings a system to life. Whether you're upgrading your current system or going all-in on a custom build, Cobra offers a carefully selected lineup designed to enhance every beat with the kind of power you don’t just hear, but feel every time you’re on the road.
Prime 12" R2 2-Ohm DVC Subwoofer
The Rockford Fosgate R2 12” subwoofer continues “The PUNCH” tradition of generating powerful car and truck audio. The R2D2-12 features a 2-Ohm Dual voice coil (DVC), 400 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring.
- Dual linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Extended pole piece and bumped vented backplate
- Protective PVC textured magnet cover
- Custom 10-AWG nickel plated push terminals
- Kevlar fiber reinforced paper cone
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
Prime 10" R2 4-Ohm DVC Subwoofer
Car Audio Fanatics wanting big bass can rely on the Prime R2D4-10 subwoofer. This 10” subwoofer handles 250 Watt RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations.
Features:
Features:
- StampCast basket with integrated spider venting
- Mica reinforced polypropylene cone
- Integrated PVC trim ring
- Optimized for both sealed and vented enclosures
- 12 AWG compression terminals
- Linear spider with embedded 16 AWG tinsel leads
- Anodized aluminum voice coil former
Punch 12" P3S Shallow 4-Ohm DVC Subwoofer
The Rockford Fosgate P3S 12" shallow mount subwoofer delivers Punch, even in depth limited situations. Rockford Fosgate understands all vehicles are not the same, because some cannot accommodate deep subwoofers. In the past, that meant no Bass. Not anymore! Now even depth challenged vehicles can have REAL Bass and the Dual Voice Coil allow configurations for every application. Shallow woofers are specifically designed for spaces where a traditional woofer cannot be used.
Features:
Features:
- M-Roll Santoprene™ surround
- Anodized aluminum cone and dustcap
- Diamond cut cast aluminum trim ring with optional grille
- StampCast basket with integrated spider venting
- Optimized for both sealed and vented enclosures
- Dual linear spider with embedded 16 AWG tinsel leads
- Shallow Motor Assembly
60MJP1222
The 60th Anniversary MOJO Pro subwoofer cranks up the heat and delivers a sub that’s as bold as it is powerful. This is no ordinary sub—it’s a blinged-out beast designed to celebrate Memphis Audio’s six decades of pushing the limits of audio performance. This limited-edition subwoofer brings the attitude with a gold and diamond-encrusted Memphis logo on the dust cap, a laser-etched 60th Anniversary logo on the gold-dipped magnet, gold terminals, and gold and diamond-encrusted badges on the basket. It’s pure flex with a hardcore edge. Engineered to handle 750W RMS power, the MOJO Pro 12″ 2Ω DVC subwoofer is an SPL powerhouse that delivers massive bass and a jaw-dropping look. Its versatile design fits into traditional enclosures, making it easy to bring that legendary MOJO bass to more setups than ever. The 60th Anniversary MOJO Pro is more than a sub—it’s a celebration of sound and style. Don’t just hear it—feel it. Grab yours before they’re gone and let your system do the talking.
Features:
Features:
- Gold dipped magnet plates
- Gold badge
- Diamond studded gold basket accents & Logos
- Specifically designed for high SPL performance
- DVVC Direct Vent Voice Coil Cooling
- 2.5” voice coil
- Cross drilled front plate venting
- Aluminum shorting ring for reduced inductance
- Double stitched foam surround
- Rigid paper cone
- Progressive spider
- Diecast basket
- Single Sided compression terminals
CS 250 S4
The Hertz CS 250 S4 subwoofer delivers powerful, punchy bass in a compact 10″ design, striking the ideal balance between output and precision for everyday systems. Rated at 300W RMS, it provides tight, consistent low-frequency performance, while the rigid pressed paper cone and durable rubber surround ensure control and clarity even at higher volumes. Designed for flexibility, it performs equally well in sealed or ported enclosures, making it an easy upgrade for adding depth, impact, and reliable bass to any setup.
Features:
Features:
- 300W RMS power handling
- 10″ (250mm) subwoofer
- 4Ω single voice coil (SVC)
- High-strength pressed paper cone
- Durable rubber surround
- Optimized for sealed and ported enclosures
- Compact, installer-friendly design
- Tight, punchy, and controlled bass response
ML 2500.3 LEGEND
The ML2500.3 delivers deep, controlled bass with effortless output, designed for systems that demand both power and precision. A high-strength neodymium motor paired with a 100 mm voice coil ensures consistent high-power handling and thermal stability, while the mineral-loaded paper cone with V-cone geometry maintains rigidity and accuracy during long excursions. The boundary-free surround increases output without sacrificing control, and with parameters optimized for compact sealed enclosures, the ML2500.3 offers flexible installation with uncompromising low-frequency performance.
Features:
Features:
- High-strength neodymium motor with FEA-optimized magnetic stability
- CNC-machined low-carbon steel plates for reduced distortion
- 100 mm (4”) CCAW voice coil, 1400 W musical power handling
- In/Out winding and TIL former for superior cooling and thermal stability
- Aluminium shorting ring for lower distortion and extended low frequencies
- “Boundary Free” IIR rubber surround for increased output
- V-cone® geometry for maximum stiffness and control
- Mineral-loaded paper cone for optimal damping
- Anti-resonant aluminium basket with integrated ventilation
- Compact design optimized for 17–25 L sealed enclosures
MPS 300 S4
MPS 300 S4 shallow subwoofer has been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box. MPS 300 is optimized to work in ultra-compact sealed boxes starting from only 22,7 Lt (0.8 Cf). Mille PRO subwoofer has a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design. This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for the spider and coil. This solution has allowed the movement of the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.
Features:
Features:
- Ultra-shallow overall depth
- 500W continuous power handling
- Optimized for extremely-compact sealed enclosure 20-24L (0.7-0.8CF)
- Air Intercooling Revolution (A.I.R.) prevents air-compression-related limitations
- Unrivalled mechanical excursion, +20% over traditional designs
- Six-layer copper voice coil (38mm/1.5 in.) ensures high thermal capacity
- Non-vented rear design allows reduced enclosure depth
- Robust screw-less mesh grille included with black screws provided
- Die-cast aluminum frame
- Solid horizontal 8AWG spring-loaded terminals
- EID: Scan, Discover, Identify
ML 2000.3 LEGEND
The ML2000.3 is an 8-inch subwoofer built for precision bass in space-limited installations. Engineered for speed, control, and musical accuracy, it delivers tight, articulate low frequencies with minimal distortion. A powerful neodymium motor and 100 mm voice coil ensure consistent, high-power performance, while the mineral-loaded paper cone with V-cone geometry provides exceptional rigidity and control. Optimized for compact sealed enclosures, the ML2000.3 delivers impressive low-end performance without sacrificing space—ideal for stealth and high-end builds.
Features:
Features:
- High-strength neodymium motor with FEA-optimized magnetic stability
- CNC-machined low-carbon steel plates for reduced distortion
- 100 mm (4”) CCAW voice coil, 1400 W musical power handling
- In/Out winding and TIL former for superior cooling and thermal stability
- Aluminium shorting ring for lower distortion and extended low frequencies
- “Boundary Free” IIR rubber surround for increased output
- V-cone® geometry for maximum stiffness and control
- Mineral-loaded paper cone for optimal damping
- Anti-resonant aluminium basket with integrated ventilation
- Compact design optimized for 10–17 L sealed enclosures
MP 250 D2.3 PRO
The Mille Pro subwoofer delivers deep, dynamic bass from a compact footprint, combining high-end performance with everyday versatility. Drawing from Mille Legend technology, it features a mineral-loaded paper cone with V-cone® geometry for precise, controlled movement, while the Boundary Free surround enhances output and low-frequency impact. A long-throw voice coil with advanced airflow cooling ensures consistent performance under demanding conditions, and the anti-resonant aluminium basket preserves clarity. With its dual 2-ohm configuration and enclosure-friendly design, it offers flexible installation and powerful, clean bass across a wide range of systems.
Features:
- Compact design optimized for sealed enclosures starting from 17 L
- 65 mm (2.5”) 4-layer CCAW voice coil, 1200 W musical power handling
- Dual 2 Ω + 2 Ω configuration for maximum system flexibility
- TIL-P former with venting for enhanced cooling and dynamic response
- V-cone® geometry for superior stiffness and control
- Boundary Free IIR rubber surround for increased output
- Mineral-loaded paper cone for optimal rigidity and damping
- Anti-resonant aluminium basket with integrated ventilation
- CNC-machined diamond-cut basket edge with Hertz logo
- Heavy-duty terminal block supporting up to 8 AWG cables
- Mounting design optimized for ultra-compact enclosures
MP 300 D2.3 PRO
Compact yet powerful, the Mille Pro subwoofer delivers the signature Hertz Sound Experience with impressive output and control. Inspired by Mille Legend technology, it features a mineral-loaded paper cone with V-cone® geometry for rigid, precise movement, while the Boundary Free surround maximizes efficiency and low-frequency impact. A high-excursion voice coil with advanced cooling ensures reliable high-power performance, and the anti-resonant aluminium basket preserves clarity. With a dual 2-ohm configuration and enclosure-friendly design, it offers flexible integration and strong, distortion-free bass for high-performance systems.
Features:
Features:
- Compact design optimized for sealed enclosures starting from 27 L
- 65 mm (2.5”) 4-layer CCAW voice coil, 1200 W musical power handling
- Dual 2 Ω + 2 Ω configuration for maximum system flexibility
- TIL-P former with venting for enhanced cooling and dynamic response
- V-cone® geometry for superior stiffness and control
- Boundary Free IIR rubber surround for increased output
- Mineral-loaded paper cone for optimal rigidity and damping
- Anti-resonant aluminium basket with integrated ventilation
- CNC-machined diamond-cut basket edge with Hertz logo
- Heavy-duty terminal block supporting up to 8 AWG cables
- Mounting design optimized for ultra-compact enclosures
- High-performance compact motor for strong magnetic control
MPS 250 S2
Designed for tight installations without sacrificing bass performance, the MPS 250 S2 shallow subwoofer delivers impressive output from ultra-compact enclosures. Recognized as an award-winning design, it stands out for combining space-saving engineering with powerful low-frequency performance. Optimized for small sealed boxes, it’s ideal for limited-depth applications like under-seat installations. Its advanced suspension system and compact motor structure enable greater cone excursion than typical shallow designs, resulting in deeper, more dynamic bass from minimal space.
Features:
Features:
- Ultra-shallow overall depth
- 500W continuous power handling
- Optimized for extremely-compact sealed enclosure 12-14L (0.4-0.5CF)
- Air Intercooling Revolution (A.I.R.) prevents air-compression-related limitations
- Unrivalled mechanical excursion, +20% over traditional designs
- Six-layer copper voice coil (38mm/1.5 in.) ensures high thermal capacity
- Non-vented rear design allows reduced enclosure depth
- Robust screw-less mesh grille included with black screws provided
- Die-cast aluminum frame
- Solid horizontal 8AWG spring-loaded terminals
- EID: Scan, Discover, Identify
CS 200 S4
The CS 200 S4 Cento subwoofer is built to deliver rich, impactful bass from compact enclosures, making it an ideal upgrade for a wide range of car audio systems. Engineered for high performance in small sealed boxes, its space-efficient design allows for flexible installation, even in tight locations. Advanced cooling keeps the multi-layer voice coil operating efficiently during extended, high-output sessions, while an optimized airflow system reduces distortion for cleaner, more controlled bass. Developed using precision simulation techniques, the cone and suspension are tuned for stability and accuracy, ensuring consistent performance even at high excursion levels. Durable terminals and thoughtful design details make installation simple, while optional protective styling elements complete a clean, professional look.
Features:
Features:
- Electroacoustic design optimized for enclosures starting from 9,6 liters.
- Fluid dynamic optimization system that drastically reduces the acoustic distortions generated by the air compression at high excursions.
- Polypropylene cone and dust cap geometry engineered through FEM simulations for low-frequency distortion reduction.
- 35 mm 4 Ω voice coil wound on six layers of pure copper on a high thermal resistance glass fiber support.
- Magnetic group geometry optimized with proprietary software for high undistorted SPL at high excursions.
- Ideal for use in custom boxes that can be shaped around the subwoofer thanks to its compact size and lack of a decompression hole.
- Terminal block featuring solid push contacts that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.
- Rubber protection of the magnetic assembly and high-strength ABS plastic gasket allowing the application of the optional grille for an elegant finish.
CS 300 S4
The CS 300 S4 Cento subwoofer delivers deep, powerful bass with impressive efficiency, making it a strong addition to any car audio system. Designed to perform in compact sealed enclosures, it combines high output with installation flexibility, even in space-limited setups. Its optimized motor structure and reduced mounting depth allow for versatile placement, while the single 4-ohm voice coil ensures easy system matching. Advanced cooling and airflow management help maintain consistent performance during demanding listening conditions, minimizing distortion at high output levels. Precision-engineered components, developed through detailed simulation, provide excellent control and reliability, making this subwoofer a solid choice for impactful, clean low-frequency reproduction.
Features:
Features:
- Electroacoustic design optimized for enclosures starting from 32 liters.
- Fluid dynamic optimization system that drastically reduces the acoustic distortions generated by the air compression at high excursions.
- Polypropylene cone and dust cap geometry engineered through FEM simulations for low frequency distortion reduction.
- 35 mm 4 Ω voice coil wound on six layers of pure copper on a high thermal resistance glass fiber support.
- Magnetic group geometry optimized with proprietary software for high undistorted SPL at high excursions.
- Ideal for use in custom boxes that can be shaped around the subwoofer thanks to its compact size and lack of the decompression hole.
- Terminal block featuring solid push contacts that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.
- Rubber protection of the magnetic assembly and high-strength ABS plastic gasket allowing the application of the optional grille for an elegant finish.
